0800 999 3300
sales@tse-ups.com
Delta Modulon 25 - 200Kva
The Modulon DPH supports ultimate availability for datacenter operations and provides the benefit of “pay as you go” without over-sizing the UPS. While achieving ultimate availability, the Modulon DPH does not compromise on power efficiency performance. When availability, efficiency and expanding according to business needs are essential, the Modulon DPH is the ideal UPS system to provide power protection and total cost of ownership (TCO) savings.
Advanced fault tolerance design achieved by self redundancy to guarantee operation continuity
Self-synchronization of power and control modules for continuous on-line operation even in the event of control module failure to avoid downtime caused by single point failure
Hot-swappable key modules and components to ensure Mean Time To Repair (MTTR) close to zero without downtime risk
Vertical expansion from 25kW to 75/150/200kW supporting N+X redundancy in a single rack enclosure to save footprint
Parallel expansion up to four units without requiring additional hardware
Optional Rack-Mount PDC (applicable for 75/150kW models) has flexibility to arrange its UPS's output power feeding according to its connected critical loads.
Optional built-in battery modules (applicable for 75kW models) at maximum four units (four battery trays each)
Full rated power (kVA=kW) to maximize power availability
High operating efficiency of 95% at 30% light load and 96% from 50% load resulting in marked energy cost savings
Low harmonic pollution (iTHD<3%) to reduce upstream investment costs and meet demanding power requirements
Built-in manual bypass features to eliminate maintenance-related downtime
Proactive detection of fan failure and switch fault for early diagnosis on UPS malfunction
Plug and play modularity to simplify the maintenance process
Delta Modulon Key Technical Data
Model
DPH 75kW System
DPH 150kW System
DPH 200kW System
Power Rating
DPH 75kW System
DPH 150kW System
DPH 200kW System
25, 50, 75 kVA
25, 50, 75, 100, 125, 150 kVA
25, 50, 75, 100, 125, 150, 175, 200 kVA
Input
Nominal Voltage
Voltage Range
Current Harmonic Distortion
Power Factor
Frequency
380/220V, 400/230V, 415/240V (3 phase, 4-wire +G)
176~276 / 305~477 Vac *
< 3% **
> 0.99
50/60 Hz
Output
Voltage
Output Power Factor
Voltage Harmonic Distortion
Voltage Regulation
Frequency
Frequency Regulation
Overload Capacity
380/220V, 400/230V, 415/240V (3 phase, 4-wire +G)
1 (kVA=kW)
≦ 2% (linear load)
± 1% (static)
50 or 60 Hz
± 0.05 Hz
≦ 125%: 10 minutes
≦ 150%: 1 minute
Interface
Standard
Optional
System communication port x 1, LCM port x 1, Parallel port x 2, Smart slot x 2, Output dry contact x 6, Input dry contact x 2, Battery dry contact x 2, REPO
SNMP IPv6 card, ModBus card, Relay I/O card,
Battery cabinet temperature sensor cable, Battery cabinet status detection kit
Conformance
Safety & EMC
BSMI, CE, EN62040-1
Other Features
Parallel Redundancy and Expansion
Emergency Power Off
Battery start
Event Log
Module and system redundancy
Maximum 4 units
Local and remote
Yes
3000 records
Efficiency
AC-AC
ECO Mode
96% (Tested by TÜV)
99%
Environment
Operating Temperature
Relative Humidity
Audible Noise (at one meter)
Dimensions (WxDxH)
0 ~ 40 ˚C
0~95% (non-condensing)
< 62 dBA
600 x 1090 x 2000 mm
Weight
UPS System
Power Module
Rack-mount PDC
Battery Module
75kW System: 310 kg
150kW System: 320 kg
200kW System: 350 kg
75kW System: 32 kg
150kW System: 32 kg
200kW System: 32 kg
75kW System: 32 kg
150kW System: 32 kg
200kW System: N/A
75kW System: 29.5 kg
150kW System: N/A
200kW System: N/A
* Lower range 140/242~176/305 Vac is acceptable under 60~100% loading condition.
** When input vTHD is less than 1%.
